Optical fiber Fusion Splice Prorectors
1、Structure and characteristics
Special design by the cross linking polyolefin melt pipe, and the composition of quartz fiber connection protection components,
no influence of fiber optical properties
Protect and improve in mechanical strength
Simple operation, reduce the risk of fiber damage during installation
Transparent, casing fiber connection clearly
Seal structure, good resistant of temperature and humidity
2、working temperature
55-100 ℃
3、shrinkage temperature range
90-110 ℃
4、technical indicators
Performance |
Test Method |
Typical data |
Tensile strength(MPa) |
ASTMD 2671 |
18 |
Elongation at break (%) |
ASTMD 2671 |
700 |
Density (g/cm2) |
ISO R1183D |
0.94 |
Dielectric strength (KV/mm) |
IEC 243 |
20 |
volume resistance |
ASTM0876 |
10Ω14 |
Length changes (%) |
ASTMD 2671 |
±5 |
5、product specification sheet
Specifications |
Item NO。 |
Sleeve length (L)(mm) |
Hot-melt tube width(D)(mm) |
Ceramic rod(d) |
|
Width(mm) |
Height(mm) |
||||
KSUN-JTSP-6TR Single-crystal |
14400641A |
41 |
2.9 |
3.45 |
1.65 |
Feedback: Quartz fibre frit banded heat shrinkable tube
Send Inquiry by feedback form learn more about product detail, price, etc.
Your email address will not be published. Required fields are marked *